Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

15.06.2025 04:16

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

but this device (an Inductor) … impedes the rapid changes in the current.

Why are most people broke?

There are two important concepts here.

One

There are three different concepts here that are getting confused.

Is it true that schizophrenia can sometimes be a demonic attack or black magic?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

First Sentence:

Upvotes:

What have I done wrong? How can I start over?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

These devices are installed between the “hot” and “neutral” and protective ground.

Why do most atheists in debates with theists take Bible verses out of context much of the time? Are they lying maliciously or do they not understand theology enough to understand the meaning?

2024–10–10[John johnson John Johnson ]

These are simplified answers to the original question, and does not change anything I wrote above.

What is lightning?

What made you feel disgusted today?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

How do I identify fake friends in life?

But… the neutral is now “floating” because of the 1 ohm resistance.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

An AC voltage/ current source, and an ac inductive load.

Does the Hamas charter specifically call for the death of all Jews and the destruction of Israel?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

He then describes Rainy Season and Lightning.

People's mental health often improves after weight-loss surgery. A study pinpoints the real reason why. - Live Science

At one ohm, the resistor has a maximum of 1 watt power.

The third is lightning and “how it gets conducted into a home.”

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Why does my narcissistic ex told me that he f*cked and sleep with other woman and then at the end says that it also happened because of me?

a photo is worth a thousand words.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Do you anal play alone?

but I think this circuit , shows a few more pieces.

Edit 2024–10.

eight

2024–10–14 [Omar Gharbi Omar Gharbi ]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

It also is a device that limits the change in current flow.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

The MOV will conduct when the voltage exceeds 50% of line voltage.

the problem then depends on "how fast does the fuse operate?".

In schematic diagrams this is the symbol for a fuse:

Can the fuse protect the electronic devices from lightning instead of a surge protector.

A circuit breaker is similar, but is resettable.

(Dc diagram shown, AC is similar).

For this case there are devices called Metal oxide varistors (MOV).

The other is “what does a “fuse” do?”

This device then solves the entire problem.

He then asserts :

A fuse is a non-resetable over current circuit protector.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–16 [ OO OLAOYE OYEBODE ]

Barnstars:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This one hit behind the barn.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

At least they know the answer if they wanted it.

This is 'the assistant's answer'

One is “what exactly is in a ‘surge protector’ ? ”

This is where this question deviates from being a 'generic' question, and becomes more specific.

Here is a simplified AC power diagram.

The bolt then partially travels down the line to your home.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

So, the voltage could go up to 500 volts, and the fuse will not open up.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

He then describes the function of a fuse.

I post the exact comment here.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Now when you have a certain ac resistance, then a current flows in a loop.

What does a fuse do?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

[old diagram got deleted by accident]

But it can get overloaded, and no longer works.

This is where the MOV conducts again, and dissipated the energy.

nine

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Because the load is inductive, the current lags the voltage.(by a bit).

what exactly is a ‘surge’ protector?

so, what happens?

[image of Common-mode choke]

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

It seems Mohan does not understand the difference between a comment and an Answer.